Since 1999, Fire Safety Supply has been the go-to for fire suppression products, industrial dry chemical systems, high and low-pressure CO2, vehicles, and clean agents. We serve various types of industries such as restaurants, commercial kitchen, wineries, and more.
Call 1-800-498-3473
Cleanguard+ Fire Extinguishers
Extinguish the fire, not your business!
Why Cleanguard+ is preferred
- Environmentally responsible – FK-5-1-12 agent has zero ODP and a GWP of about 0.01 with an atmospheric lifetime of roughly one week. It is compliant with the AIM Act transition away from HFCs and is not scheduled for phase-out under the Montreal Protocol as of 2023.
- Residue-free and corrosion-resistant – No powder cleanup and no collateral damage to sensitive electronics or plastics; ideal where uptime matters.
- Safer for people and spaces – FK-5-1-12 has substantially lower acute cardiotoxicity exposure limits than Halotron 1, allowing safe discharge in considerably smaller spaces.
- Proven hardware, modern agent – Uses the same durable platform as legacy Cleanguard with updated FK-5-1-12 agent; legacy SKUs are replaced by CA03, CA07, CA13, and CA14-NM.
- Compliance and listings – UL/ULC listed, NFPA 10 compliant; selected models carry USCG marine approvals.
Where Cleanguard+ excels 
Designed for light and ordinary hazards where equipment, data, and finishes must remain unharmed:
- Computer rooms, essential communications, data and document storage, laboratories
- Healthcare, clean manufacturing, museums, archives, and libraries
- Magnetic-resonance suites: CA14-NM unit is MR Conditional to 7.0 Tesla for MRI areas
Cleanguard+ versus common competitors
| Criteria | Cleanguard+ (FK-5-1-12) | Typical Halocarbon Competing Agents |
|---|---|---|
| Residue / Cleanup | Leaves no residue; no cleanup; protects finishes and electronics | May leave residue or cause corrosion risk on sensitive gear |
| People Safety | Lower acute cardiotoxicity exposure; can be used in smaller spaces | Higher exposure limits; larger safe-use volumes required |
| Environmental Profile | ODP 0; GWP ~0.01; ~1-week atmospheric life; AIM-Act compliant | Higher GWP and longer atmospheric life; HFCs are being phased down |
| Operational Continuity | No evacuation for cleanup; minimizes downtime | Potential cleanup and downtime after discharge |
Models and key specifications
| Model | Agent Capacity | UL/ULC Class | Effective Range | Notes |
|---|---|---|---|---|
| CA03VB | 3.5 lb | 2-B:C | 8–10 ft | UL/ULC listed |
| CA07 | 7.5 lb | 5-B:C | 8–10 ft | UL/ULC and USCG approvals |
| CA13 | 13 lb | 1-A:10-B:C | 10–12 ft | Updated shell size for better cabinet fit |
| CA14-NM | 14 lb | 1-A:10-B:C | 10 ft | MR Conditional 7.0 Tesla for MRI rooms |
| CA25 | 27.75 lb | 2-A:10-B:C | 14–16 ft | UL/ULC and USCG approvals |
Transitions and availability
The Cleanguard+ line replaces legacy Cleanguard FE models, effective October 9, 2023. A dedicated operations and maintenance manual is available, and legacy replacement parts remain supported through 2030.
Get a quote!
Fire Safety Supply is an authorized distributor and service provider. Our team can help you select the right Cleanguard+ model for your hazards, cabinet sizes, and code requirements, and can demonstrate the corrosion-comparison shown in the video above for your stakeholders.
- On-site hazard survey and placement guidance
- Cabinet fitment checks for CA13 and other models
- Installation, inspection, maintenance, and USCG brackets where applicable