Since 1999, Fire Safety Supply has been the go-to for fire suppression products, industrial dry chemical systems, high and low-pressure CO2, vehicles, and clean agents. We serve various types of industries such as restaurants, commercial kitchen, wineries, and more.
Call 1-800-498-3473
Amerex Adapters
Adapters - Fill (Recharge) & Hydrotest (Cylinder & Hose)
Browse Amerex fill and hydro-test adapters by extinguisher type. Click any item below to open the product page in a new tab.
Water, Water Mist, Wet Chemical & Foam Extinguishers
Item 4*
Part #: 02141
Fill Adapter - Hansen Quick Connect - 240, 250, 252, 254, 260, 262, C260, C262, C270, C272 - 5/8”-18 UNF
View
Fill Adapter - Hansen Quick Connect - 240, 250, 252, 254, 260, 262, C260, C262, C270, C272 - 5/8”-18 UNF
Item 6*
Part #: 09492
Fill Adapter - Hansen Quick Connect - B270, B272, B260, B262 - 1/2”-14 NPSL
View
Fill Adapter - Hansen Quick Connect - B270, B272, B260, B262 - 1/2”-14 NPSL
Dry Chemical - Aluminum Valve Extinguishers
Item 4*
Part #: 02141
Fill Adapter - Hansen Quick Connect 5/8” - 18 UNF
(20 lb. Aluminum Valve)
View
Fill Adapter - Hansen Quick Connect 5/8” - 18 UNF
(20 lb. Aluminum Valve)
Dry Chemical - Brass Valve, High Performance, CL-D Extinguishers (Female Thread)
Item 4*
Part #: 02141
Fill Adapter - Hansen Quick Connect - 240, 250, 252, 254, 260, 262, C260, C262, C270, C272 - 5/8”-18 UNF
View
Fill Adapter - Hansen Quick Connect - 240, 250, 252, 254, 260, 262, C260, C262, C270, C272 - 5/8”-18 UNF
Item 6*
Part #: 09492
Fill Adapter - Hansen Quick Connect - B270, B272, B260, B262 - 1/2”-14 NPSL
View
Fill Adapter - Hansen Quick Connect - B270, B272, B260, B262 - 1/2”-14 NPSL
Halon 1211 - Aluminum Valve Extinguishers
Halon 1211 - Brass Valve Extinguishers
Halotron I - Aluminum Valve Extinguishers
Halotron I - Brass Valve Extinguishers
Carbon Dioxide - All CO2 Hand Portable Extinguishers
Item 11
Part #: 01316
Fill Adapter - Hansen Quick Connect - 1/4”-18 NPT, Installs on 2 1/2lb., 5lb. Discharge Tube - 3/8”-18 NPT with the Bushing removed, Install on 10lb.,15lb., 20lb. CO2 Elbow or valve outlet after 07/2020
View
Fill Adapter - Hansen Quick Connect - 1/4”-18 NPT, Installs on 2 1/2lb., 5lb. Discharge Tube - 3/8”-18 NPT with the Bushing removed, Install on 10lb.,15lb., 20lb. CO2 Elbow or valve outlet after 07/2020
Carbon Dioxide - Wheeled 50 lb & 100 lb Extinguishers
Wheeled Stored Pressure - Dry Chemical, Halotron I, and Halon 1211
Item 16
Part #: 06157
Hydro-test Adapter (Hose) (Male Plug) -
Use with P/N: 6160 for ½” Hose Assemblies 3/4”-11½” NH
View
Hydro-test Adapter (Hose) (Male Plug) -
Use with P/N: 6160 for ½” Hose Assemblies 3/4”-11½” NH
Item 17*
Part #: 09857
Fill Adapter - 125, 150 & 250 lb. Dry Chemical
150 lb. Halon 1211, 150 lb. Halotron I and 150 lb. Novec 1”-8 NH, Hydro-test Adapters, Agent Cylinders 110 ft3 Models
View
Fill Adapter - 125, 150 & 250 lb. Dry Chemical
150 lb. Halon 1211, 150 lb. Halotron I and 150 lb. Novec 1”-8 NH, Hydro-test Adapters, Agent Cylinders 110 ft3 Models
Item 18*
Part #: 05152
Hydro-test Adapter (Cylinder) - 125, 150 & 250 lb. Dry Chemical, 150 lb. Halon 1211, 150 lb. Halotron I and 150 lb. Novec 2”-8 UN
View
Hydro-test Adapter (Cylinder) - 125, 150 & 250 lb. Dry Chemical, 150 lb. Halon 1211, 150 lb. Halotron I and 150 lb. Novec 2”-8 UN
Item 19*
Part #: 05723
Hydro-test Adapter (Male Plug) (Hose) - Use with P/N: 9857 for ¾” and 1” Hose Assemblies 1”-8 NH
View
Hydro-test Adapter (Male Plug) (Hose) - Use with P/N: 9857 for ¾” and 1” Hose Assemblies 1”-8 NH
Wheeled Nitrogen or Argon Cylinder Operated - Gas Cylinder
Hose Hydro-test Note: For wheeled dry chemical, foam, halon, halotron, and novec units, use 06160 adapter and 06157 plug for 1/2 inch hose. For 3/4 inch and 1 inch hose, use 09857 adapter and 05723 plug.
Adapter Note: All adapters with an asterisk may be used on more than one type of extinguisher.
Replacement O-Rings / Gaskets for Adapters