Since 1999, Fire Safety Supply has been the go-to for fire suppression products, industrial dry chemical systems, high and low-pressure CO2, vehicles, and clean agents. We serve various types of industries such as restaurants, commercial kitchen, wineries, and more.
Ansul 009336 RED LINE PLUS-FIFTY C Dry Chemical Agent, 50 lb Pail
Genuine Ansul PLUS-FIFTY C dry chemical recharge agent for compatible RED LINE and SENTRY fire extinguishers.
Product Overview
The Ansul 009336 PLUS-FIFTY C dry chemical agent is supplied in a 50 lb pail for professional fire extinguisher recharge and service applications. It is designed for compatible archived RED LINE, older SENTRY and current SENTRY extinguisher models that specifically require PLUS-FIFTY C agent.
PLUS-FIFTY C is a dry chemical extinguishing agent intended for compatible equipment protecting against Class B flammable-liquid and gas hazards and Class C energized-electrical-equipment hazards. Confirm the required agent type and quantity before servicing any extinguisher.
Product Features
- Genuine Ansul dry chemical recharge agent
- Ansul part number: 009336
- Also referenced as part number 9336
- PLUS-FIFTY C dry chemical formulation
- Supplied in a 50 lb pail
- Designed for compatible RED LINE and SENTRY fire extinguishers
- Suitable for professional extinguisher recharge and service
- For use by trained fire-protection personnel
| Manufacturer | Ansul |
|---|---|
| Part Number | 009336 |
| Alternate Part Number | 9336 |
| Product Type | Dry Chemical Recharge Agent |
| Agent | PLUS-FIFTY C Dry Chemical |
| Container Size | 50 lb Pail |
| Fire Classes | Class B and Class C Applications in Approved Equipment |
| Compatible Product Lines | Selected Ansul RED LINE and SENTRY Models |
| Application | Professional Fire Extinguisher Recharge and Service |
| Quantity | One 50 lb Pail |
Compatible Ansul Models
Ansul part number 009336 is intended for compatible equipment requiring PLUS-FIFTY C dry chemical agent. Applicable models may include:
- I-10G-1, RP-I-10G-1 and LT-I-10G-1
- I-20G-1, RP-I-20G-1, CR-I-20G-1 and LT-I-20G-1
- I-30G-1, RP-I-30G-1, CR-I-30G-1 and LT-I-30G-1
- SY-0236 and SY-0531
- SY-1034 and SY-2034
- C10 and C20
- Other compatible archived or current models requiring PLUS-FIFTY C agent
Verify Agent Compatibility Before Use
Fire extinguishers must be recharged only with the extinguishing agent type and quantity specified by the manufacturer. Confirm that Ansul part number 009336 and PLUS-FIFTY C dry chemical agent are approved for your extinguisher before use. Refer to the extinguisher nameplate, current Ansul service documentation or a qualified fire-equipment professional.
About Ansul
Ansul® provides fire-protection products, extinguishing agents and suppression systems for commercial, industrial and special-hazard applications. Ansul identifies PLUS-FIFTY C as one of the dry chemical agents used in its fire-protection equipment. :contentReference[oaicite:0]{index=0}
The Ansul product line includes:
- Hand-portable and wheeled fire extinguishers
- Cartridge-operated RED LINE extinguishers
- Pre-engineered restaurant, vehicle and industrial systems
- Engineered fire-detection and suppression systems
- Dry chemical, foam and gaseous clean agents
- Hazardous chemical spill-control and vapor-mitigation agents
For Professional Recharge Use
Fire extinguisher discharge, recovery, recharge, testing and maintenance should be performed by trained fire-protection personnel using approved equipment, current manufacturer instructions and all applicable codes and regulations.
