Since 1999, Fire Safety Supply has been the go-to for fire suppression products, industrial dry chemical systems, high and low-pressure CO2, vehicles, and clean agents. We serve various types of industries such as restaurants, commercial kitchen, wineries, and more.
Ansul 056776 SENTRY 195 PSI Pressure Gauge
Genuine Ansul replacement pressure gauge for compatible 5 lb, 10 lb and 20 lb SENTRY dry chemical fire extinguishers.
Product Overview
The Ansul 056776 SENTRY pressure gauge is a genuine 195 PSI replacement gauge designed for compatible Ansul SENTRY dry chemical fire extinguishers. It provides a visible indication of the extinguisher cylinder pressure and forms part of the applicable stored-pressure valve assembly.
Product Features
- Genuine Ansul fire extinguisher replacement part
- Ansul part number: 056776
- Also referenced as part number 56776
- Pressure rating: 195 PSI
- Designed for compatible SENTRY dry chemical extinguishers
- Used with selected 5 lb, 10 lb and 20 lb extinguisher models
- Provides a visible indication of cylinder pressure
- Sold individually
| Manufacturer | Ansul |
|---|---|
| Part Number | 056776 |
| Alternate Part Number | 56776 |
| Product Type | Fire Extinguisher Pressure Gauge |
| Pressure Rating | 195 PSI |
| Extinguisher Series | Ansul SENTRY Dry Chemical |
| Compatible Sizes | Selected 5 lb, 10 lb and 20 lb Models |
| Application | Replacement Cylinder Pressure Gauge |
| Quantity | One Pressure Gauge |
Compatible Ansul Models
Ansul part number 056776 is identified as the 195 PSI pressure gauge for compatible SENTRY dry chemical extinguisher models including:
- AA05S-1 and AA05S-1VB
- PK05 and PK05S
- AA10S, PK10S and C10S
- AA20-1, PK20 and C20
Important Compatibility Information
This 195 PSI gauge is not designated for every SENTRY dry chemical extinguisher. The A02S 2.5 lb model uses a different 125 PSI gauge. Confirm that Ansul part number 056776 and the 195 PSI rating are specified for your extinguisher before ordering.
About Ansul
Ansul® provides fire-protection products and systems for commercial, industrial and special-hazard applications. Its equipment is designed and manufactured to established standards and evaluated through applicable testing and approval processes.
The Ansul product line includes:
- Hand-portable and wheeled fire extinguishers
- Large self-contained handline units
- Pre-engineered restaurant, vehicle and industrial systems
- Engineered fire-detection and suppression systems
- Dry chemical, foam and gaseous clean agents
- Hazardous chemical spill-control and vapor-mitigation agents
Professional Installation Recommended
Fire extinguisher inspection, disassembly, pressure relief, repair, recharge and maintenance should be performed by qualified fire-protection personnel in accordance with manufacturer instructions, applicable fire codes and local requirements.
