Since 1999, Fire Safety Supply has been the go-to for fire suppression products, industrial dry chemical systems, high and low-pressure CO2, vehicles, and clean agents. We serve various types of industries such as restaurants, commercial kitchen, wineries, and more.
Ansul 429146 Bracket Assembly for AA05VB, A05VB, PK05, C05 and FE05
Genuine Ansul fire extinguisher bracket assembly for compatible SENTRY and CLEANGUARD models.
Product Overview
The Ansul 429146 bracket assembly is a genuine mounting component designed for compatible Ansul portable fire extinguishers. It helps secure the extinguisher during storage or transport while keeping the unit properly supported and readily accessible.
This bracket assembly is designed for selected 5 lb Ansul SENTRY and CLEANGUARD extinguisher models, including AA05VB, A05VB, PK05, C05 and FE05, when part number 429146 is specified.
Product Features
- Genuine Ansul fire extinguisher mounting component
- Ansul part number: 429146
- Complete fire extinguisher bracket assembly
- Designed for compatible 5 lb extinguisher models
- Compatible with selected SENTRY and CLEANGUARD extinguishers
- Helps secure the extinguisher during storage and transport
- Suitable for commercial, industrial and vehicle applications
- Sold as one bracket assembly
| Manufacturer | Ansul |
|---|---|
| Part Number | 429146 |
| Product Type | Fire Extinguisher Bracket Assembly |
| Compatible Product Lines | Ansul SENTRY and CLEANGUARD |
| Compatible Models | AA05VB, A05VB, PK05, C05 and FE05 |
| Compatible Size | Selected 5 lb Fire Extinguishers |
| Application | Fire Extinguisher Storage, Support and Transport |
| Quantity | One Bracket Assembly |
Compatible Ansul Models
Ansul part number 429146 is designed for compatible fire extinguisher models including:
- AA05VB
- A05VB
- PK05
- C05
- FE05
Verify Compatibility Before Ordering
Fire extinguisher brackets may vary according to the extinguisher model, cylinder diameter, valve configuration and production date. Confirm that Ansul part number 429146 is specified for your extinguisher before ordering. Refer to the extinguisher nameplate, applicable Ansul parts documentation or a qualified fire-equipment professional.
Installation Information
The bracket assembly must be securely attached to a structurally suitable surface using hardware appropriate for the installation location and the fully charged weight of the extinguisher. Mounting hardware is not included unless specifically stated.
About Ansul
Ansul® provides fire-protection products, replacement components and suppression systems for commercial, industrial and special-hazard applications. Its equipment is designed and manufactured to established standards and evaluated through applicable testing and approval processes.
The Ansul product line includes:
- Hand-portable and wheeled fire extinguishers
- Large self-contained handline units
- Pre-engineered restaurant, vehicle and industrial systems
- Engineered fire-detection and suppression systems
- Dry chemical, foam and gaseous clean agents
- Hazardous chemical spill-control and vapor-mitigation agents
Professional Installation Recommended
Fire extinguisher mounting equipment should be installed according to current manufacturer instructions, applicable fire codes and local requirements. Confirm that the bracket, mounting surface and installation hardware are suitable before placing the extinguisher into service.
