Since 1999, Fire Safety Supply has been the go-to for fire suppression products, industrial dry chemical systems, high and low-pressure CO2, vehicles, and clean agents. We serve various types of industries such as restaurants, commercial kitchen, wineries, and more.
Ansul 436595 SENTRY Valve Assembly for AA10S, PK10S and C10S
Genuine Ansul replacement valve assembly for compatible AA10S, PK10S and C10S SENTRY dry chemical fire extinguishers.
Product Overview
The Ansul 436595 SENTRY valve assembly is a genuine replacement component designed for compatible Ansul AA10S, PK10S and C10S dry chemical fire extinguishers.
The valve assembly forms part of the extinguisher operating and discharge system. It should be installed only when Ansul part number 436595 is specified for the extinguisher model and configuration.
Product Features
- Genuine Ansul fire extinguisher replacement component
- Ansul part number: 436595
- Complete valve assembly
- Designed for compatible Ansul SENTRY extinguishers
- Compatible with AA10S, PK10S and C10S models
- Suitable for professional extinguisher repair and maintenance
- Sold as one valve assembly
| Manufacturer | Ansul |
|---|---|
| Part Number | 436595 |
| Product Type | Fire Extinguisher Valve Assembly |
| Product Line | Ansul SENTRY Dry Chemical |
| Compatible Models | AA10S, PK10S and C10S |
| Application | Fire Extinguisher Operating and Discharge System |
| Service Use | Professional Repair, Maintenance and Component Replacement |
| Quantity | One Valve Assembly |
Compatible Ansul Models
Ansul part number 436595 is designed for compatible SENTRY dry chemical fire extinguisher models including:
- AA10S
- PK10S
- C10S
Verify Compatibility Before Ordering
Fire extinguisher valve assemblies may vary according to model, production date, cylinder configuration and operating pressure. Confirm that Ansul part number 436595 is specified for your extinguisher before ordering. Refer to the extinguisher nameplate, applicable Ansul parts documentation or a qualified fire-equipment professional.
Professional Service Required
Replacing a fire extinguisher valve assembly requires depressurizing, disassembling, inspecting, reassembling, recharging and testing the extinguisher. This work should be completed by trained fire-protection personnel using approved tools, replacement components and current manufacturer procedures.
About Ansul
Ansul® provides fire-protection products, replacement components and suppression systems for commercial, industrial and special-hazard applications. Its equipment is designed and manufactured to established standards and evaluated through applicable testing and approval processes.
The Ansul product line includes:
- Hand-portable and wheeled fire extinguishers
- Large self-contained handline units
- Pre-engineered restaurant, vehicle and industrial systems
- Engineered fire-detection and suppression systems
- Dry chemical, foam and gaseous clean agents
- Hazardous chemical spill-control and vapor-mitigation agents
Installation and Testing
Fire extinguisher inspection, repair, recharge and testing should be performed according to current manufacturer instructions, applicable fire codes and local requirements. The extinguisher should be properly inspected and tested before being returned to service.
